Safety wiring procedure for spinners

Spinners must be tightened with a lead hammer and safety wired.
Please follow this sequence of photos to help you with the safety wiring procedure.
Ensure that the safety wire is "pulling" in the same direction as the spinner is tightened .
The right hand (standard clockwise) spinner must be on the left side (looking forward from the rear of the vehicle) and visa versa.
In other words tighten the spinner in the opposite direction of wheel rotation when the vehicle is being driven forwards.
Please call 1888 720 0459 in your require more information on this procedure.

1
2
3
4
5
final

| Home | Contact Us | Tech Info | How to Order | Gallery | Testimonials |

Copyright: Vintage Wheels, Inc, 2004
Tel:(619) 952 4717; (888) 720 0459; Fax:(858) 720 0459
(858) 349 1074 - Margot (Accounts and Administration)
Email: sales@vintagewheelsus.com

Ford, Cobra, Shelby, and GT40 are registered trademarks. Vintage Wheels Inc is not connected to the holders of these trademark rights.