Vintage Wheels adapter and spinner kits are designed to be used with our range of one piece and two piece pin drive wheels. We can offer adapters and spinners that are compatible with most aftermarket pin drive wheels. Below are some of the features of our design that makes the system very safe and durable.

ADAPTERS

• Forged steel and zinc plated ensuring great strength and durability
• Stud centric and hub centric - adapters are sized to index correctly on your hub centering ring .For smaller hub centers we can supply hub centering rings (extra cost)
• Cross drilled above the spinner threads to allow locking pins to be fitted for race use.
• Stock adapters are drilled 5 on 4.5in and 5 on 4.75in We can drill to custom bolt circles such as 5 on 4.25in (108mm). 5 on 112mm, 5 on120mm, 5 on 5in and 5 on 130mm. Also now availble to suit 4 lug hubs!
• End cap retainer lip - end caps are retained with an O ring ,our adapters also have a lip that ensures that the end caps can't pop out off thus preventing possible wheel dings.
• Custom length adapters available for special applications

SPINNERS

• Forged from 6061 aluminum - will not break like some of the cast spinners.
• Compatible with orginal 6 pin hubs and most aftermarket adapter systems
• Highly polished or flat aluminum finish
• 1.40 inches deep in the thread area and relieved slightly for easier installation, helps prevent fumbling and potential wheel dings
• Drilled for satety wire - spinners must be wired correctly!

HEX NUTS

• Milled from 6061 aluminum ,great alternative to spinners
• Available in natural or anodized red, blue, gold, other colors on request
• Requires 3 inch AF socket

TOOLS

• 5 lb lead Hammer -essential for tightening your spinners- never use a rubber hammer!
• Safety wire pliers - all knock off wheels must be safety wired

Request more info ∗required